|
DD-130 Vibratory Asphalt
Compactor
 The
DD-130 features dual 84 inch (2135 mm) wide drums with 2500
vpm (41.7 Hz) frequency for high performance capability on
main line highway and other large paving jobs. Operating
weight over 14 tons (12.9 metric tonnes) meets all state
D.O.T. static rolling requirements. The DD-130 has a nominal
capacity to more than 300 tons (265 metric tonnes) of HMA
per hour.
Standard Features
• Non-corrosive polyethylene water tank, 300 gallon (1135
liters) capacity
• Patented impact spacing meter to provide
consistent, uniform compaction of asphalt
• 3/4, 1-1/4, 1-3/4, or 2 mph (1.2, 2,
2.8, 3.2 km/hr) automatic vibration on/off speed settings
• Automatic vibration control with manual
push button vibration switch located on propulsion lever
• Two complete and independent water
systems with triple water filtration, four water pumps, four
spray bars and variable water flow
• Eight variable amplitude settings
• Five-position rotating operator’s
console for excellent visibility
• Machined drums, chamfered drum edges
• Automatic reversing eccentrics
• ROPS/FOPS and seat belt
|
DD-130
SPECIFICATIONS
|
|
Machine Weights (with ROPS/FOPS)
|
|
Operating Weight
|
28,430 lb. (895 kg)
|
|
Static Weight at Front Drum
|
14,815 lb. (6720 kg)
|
|
Static Weight at Rear Drum
|
13,615 lb. (6175 kg)
|
|
Shipping Weight
|
27,180 lb. (12330 kg)
|
|
Overall Length
|
227 in. (5765 mm)
|
|
Overall Width
|
92 in. (2435 mm)
|
|
Overall Height top of steering wheel
|
95 in. (2413 mm)
|
|
Overall Height (top of ROPS/FOPS)
|
125 in. (3175 mm)
|
|
Drum Base
|
135 in. (3430 mm)
|
|
Curb Clearance
|
21 in. (535 mm)
|
|
Outside Turning Radius
|
256 in. (6495 mm)
|
|
Drum Width
|
84 in. (2135 mm)
|
|
Drum Diameter
|
55.1 in. (1400 mm)
|
|
Shell Thickness (nominal)
|
0.8 in. (20 mm)
|
|
Finish
|
Machined, with chamfered edges
|
|
Frequency
|
2500 vpm (41.7 Hz)
|
|
Centrifugal Force maximum per drum
|
36,030 lb. (160 kN)
|
|
Centrifugal minimum per drum
|
15,975 lb. (71.2 kN)
|
|
Amplitude Settings
|
Eight
|
|
Nominal Amplitude maximum
|
.035 in. (.89 mm)
|
|
Nominal Amplitude minimum
|
.016 in. (.41 mm)
|
|
Type System
|
Closed-loop hydrostatic
|
|
Drum Drive (both drums)
|
Low speed, high torque
|
|
Speed
|
0-8.2 mph (0-13.2 km/hr)
|
|
Gradeability (theoretical)
|
32%
|
|
Make & Model
|
Cummins 6BTA 5.9
|
|
Rated Power
|
174 hp (130 kW) @ 2200 rpm
|
|
Electrical System
|
12-volt DC, negative ground
|
|
Service
|
Dynamic hydrostatic through propulsion
system
|
|
Parking/Secondary
|
Spring-Applied, Hydraulically Released
(SAHR) (on each drum)
|
|
Design
|
Centerpoint articulation
|
|
Type System
|
Hydrostatic
|
|
Articulation Angle
|
+ 35°
|
|
Type
|
Pressurized, electric diaphragm pumps
with variable flow control
|
|
Nozzles (hand-serviceable)
|
8 main, 7 aux per drum
|
|
Filters
|
Three
|
|
Tank Capacity
|
300 gal. (1135 liters)
|
|
Miscellaneous Specifications
|
|
Fuel Capacity
|
60 gal. (227 liters)
|
|
Hydraulic Oil Capacity
|
48 gal. (182 liters)
|
|
Oscillation Angle
|
+10°
|
|
|
Back-up
alarm
